TM 5-3800-205-10-1
RAIL TRANSPORT - CONTINUED
0021 00
SECURE MACHINE ON FLATCAR - CONTINUED
WINDSHIELD WIPER
ARM ASSEMBLY
STACK
UPPER
HANDRAIL
(WITH SIDE
MIRROR)
RAMPS
TRAY
RETAINING
PIN
WINDSHIELD
TOOLBOX
(WITH HINGE)
ROPS/FOPS
390-1124
Table 3. Stowage Instructions for ISU-60 Container - Single-Door End - Continued.
COMPONENT
STOWAGE INSTRUCTIONS
ROPS/FOPS
WARNING
ROPS/FOPS weighs 447 lb (203 kg). Use extreme caution when lifting and do
not allow to swing free.
CAUTION
Use caution not to damage windshield when handling ROPS/FOPS.
1.
Using a suitable three-point lifting device, lift ROPS/FOPS into position over tray,
with front of ROPS/FOPS to the right.
2.
Lower ROPS/FOPS onto four studs, one at each corner of tray.
3.
Secure ROPS/FOPS with two straps.
Toolbox
1.
Place toolbox on front edge of tray.
2.
Secure with three straps.
3.
Slide tray all the way in.
4.
Secure tray with two pins through tray and container floor.
Ramps
1.
Position each ramp against right wall of container.
2.
Secure each ramp with strap.
CAUTION
Check to ensure all components are securely fastened prior to closing and
securing door. Failure to do so may result in damage to equipment.
0021 00-26
