TM 5-3800-205-10-1
RAIL TRANSPORT - CONTINUED
0021 00
RETURN MACHINE TO OPERATIONAL CONFIGURATION
NOTE
Whenever hydraulic hose quick disconnects need to be connected, operate control levers through all posi-
tions (WP 0004 00) to relieve any dropped hydraulic pressure in hoses. This will facilitate connection of
hoses.
1.
OCONUS ONLY: Install upper handrail with side mirror on lower handrail of tractor with two bolts, washers, and nuts.
Tighten nuts securely.
2.
OCONUS ONLY: Loosen two bolts and unfold side mirror. Adjust to provide visibility to side and rear of machine.
Tighten bolts.
SIDE MIRROR
UPPER
LOOSEN
HANDRAIL
BOLTS
FOR MIRROR
ADJUSTMENT
390-1020
LOWER
BOLTS, WASHERS
HANDRAIL
AND NUTS
WARNING
Do NOT install exhaust stack until engine exhaust components have cooled to the touch. Wear gloves and
protective clothing as required to guard against burns. Failure to follow this warning may cause personnel
injury.
3.
OCONUS ONLY: Remove exhaust extension from muffler on right side of tractor and install exhaust stack in its place:
a.
Loosen nut, bolt, two washers, and clamp, and remove exhaust extension from muffler. Retain mounting hardware
on extension and set aside for stowage in ISU-60 container.
0021 00-32