TM 5-3800-205-10-1
RAIL TRANSPORT - CONTINUED
0021 00
RETURN MACHINE TO OPERATIONAL CONFIGURATION - CONTINUED
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure any lifting device used is in good condition and of suitable lift capacity. Keep clear of heavy
parts supported only by lifting device. Failure to follow this warning may result in death or injury to person-
nel.
NOTE
ROPS/FOPS weighs 447 lb (203 kg).
8.
OCONUS ONLY: Install ROPS/FOPS on cab corner posts:
a.
Attach a suitable overhead lifting device to three lift points on top of ROPS/FOPS. Take up slack in slings.
NOTE
Tighten all mounting nuts using a crisscross tightening pattern. This will ensure even tightening and correct
installation alignment on all four cab corner posts.
b.
Lift ROPS/FOPS into position at four corner posts. While positioning ROPS/FOPS, loosely install all 16 bolts, 32
washers, and 16 nuts. Final tighten nuts in a crisscross tightening pattern to 317 lb-ft (430 Nm).
c.
Remove lifting device from ROPS/FOPS.
ROPS/FOPS
390-1021
BOLTS, WASHERS,
CAB CORNER POST
AND NUTS
WARNING
Use assistance and handle windshield with caution to ensure it does not become damaged. Failure to do so
may damage windshield or cause personnel injury from cut glass if windshield breaks.
0021 00-42
