TM 5-3800-205-23-1
UNIT PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) - CONTINUED
0010 00
Table 1. Unit Preventive Maintenance Checks and
Services (PMCS) for 613CS Scraper - Continued.
LOCATION
ITEM TO
ITEM
MAN-
NOT FULLY MISSION
CHECK/
NO.
INTERVAL
HOURS
PROCEDURE
CAPABLE IF:
SERVICE
c. Position machine so that plugs at
21
2000 Hours
1.0 Hours Front Axle
wheel end final drives are at 3 or 9
(Con't) or Annual
Differential
o'clock.
and Final
Drives
PLUG WITH
O-RING AND SEAL
FINAL
DRIVE
d. Add oil (Item 21, 22 or 23, WP
level/fill opening until oil is level
with opening. Clean level/fill plug
and reinstall with a new seal.
e. Add oil (Item 21, 22 or 23, WP
level with opening. Clean plug and
reinstall with a new O-ring and
seal.
Notify DS Maintenance to remove,
22
2000 Hours
4.0 Hours Rear Axle
clean, inspect, pack with GAA grease
or Annual
Wheel Bear-
(Item 16, WP 0171 00), and install
ings
rear axle wheel bearings.
0010 00-24
