TM 5-3800-205-23-1
FUEL SHUTOFF SOLENOID REPLACEMENT - CONTINUED
0017 00
REMOVAL
1.
Remove three nuts (1), washer (2), two lockwashers
1,2,3
4
5
6
(3), and three wires (4) from fuel shutoff solenoid (5).
2.
Using spanner wrench and ratchet wrench, remove
fuel shutoff solenoid (5) from fuel transfer pump/gov-
ernor (6).
3.
Remove and discard seal from fuel shutoff solenoid
(5).
INSTALLATION
1.
Apply a thin coat of engine oil to new seal and install seal on fuel shutoff solenoid (5).
2.
Install fuel shutoff solenoid (5) on fuel transfer pump/governor (6). Tighten fuel shutoff solenoid to 22 lb-ft (30 Nm).
3.
Install three wires (4) on fuel shutoff solenoid (5) with two lockwashers (3), washer (2), and three nuts (1).
4.
Close engine access door (TM 5-3800-205-10-1 or TM 5-3800-205-10-2).
END OF WORK PACKAGE
0017 00-2
