TM 5-3800-205-23-1
FUEL LINES AND FITTINGS REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Equipment Condition
Maintenance Level
Unit
Machine parked on hard, level surface (TM 5-3800-
205-10-1 or TM 5-3800-205-10-2)
Tools and Special Tools
Tool kit, general mechanic's (Item 33, WP 0172
Scraper bowl or water tank lowered to ground (TM
5-3800-205-10-1 or TM 5-3800-205-10-2)
Shop equipment, common no. 1 (Item 24, WP
Parking brake applied (TM 5-3800-205-10-1 or TM
5-3800-205-10-2)
Materials/Parts
Wheels chocked (TM 5-3800-205-10-1 or TM 5-
Cap set, protective (Item 5, WP 0171 00)
3800-205-10-2)
Fuel (Item 13, 14 or 15, WP 0171 00)
Rag, wiping (Item 31, WP 0171 00)
Battery disconnect switch in OFF position (TM 5-
3800-205-10-1 or TM 5-3800-205-10-2)
Strap, tiedown (Item 38, WP 0171 00)
Tag, marker (Item 39, WP 0171 00)
Engine access door opened (TM 5-3800-205-10-1
or TM 5-3800-205-10-2)
O-ring (as required)
WARNING
DO NOT perform fuel system checks, inspections or maintenance while smoking or near fire, flames or
sparks. Fuel may ignite causing damage to machine and injury or death to personnel.
Clean up all leaked or spilled fuel.
CAUTION
Cap all hoses to prevent fluid loss and contamination of fuel system.
NOTE
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance,
testing, adjusting and repair of the machine. Be prepared to collect fluid with a suitable container before
opening any compartment or disassembling any component containing fluids.
Dispose of all fluids according to local regulations and mandates.
Tag all hoses and fittings to aid in installation.
