TM 5-3800-205-23-1
ENGINE OIL PAN REPLACEMENT - CONTINUED
0014 00
INSTALLATION
1.
Clean mating surfaces of engine oil pan (3) and cylin-
4
1,2
3
(HIDDEN)
der block.
NOTE
Do NOT apply liquid gasket material on
oil pan or gasket surface of engine oil pan.
2.
Position new gasket (4) on oil pan (3) and install
engine oil pan on cylinder block with 36 washers (2)
and bolts (1).
390-343
ENGINE NOT SHOWN
3.
Tighten bolts (1) to 23 lb-ft (31 Nm) in the following sequence:
a.
Tighten four bolts (5).
b.
Starting with bolt (6), tighten remaining bolts in counterclockwise sequence.
5
5
6
390-344
5
5
4.
Fill engine oil (WP 0009 00 and WP 0010 00).
WARNING
If machine is parked indoors, DO NOT run engine unless exhaust fumes are vented to the outside. Failure to
follow this warning may cause injury or death due to carbon monoxide poisoning.
5.
Start engine (TM 5-3800-205-10-1 or TM 5-3800-205-10-2), build up oil pressure, and stop engine. Check oil pan for
leaks.
6.
Install front and center guard plates (WP 0100 00).
END OF WORK PACKAGE
0014 00-2
