TM 5-3800-205-23-1
ENGINE OIL FILTER REPLACEMENT - CONTINUED
0013 00
INSTALLATION
1.
Apply a coat of clean engine oil to oil filter seal.
2.
Install engine oil filter (2) on oil filter base (1) until seal contacts base, then tighten an additional 3/4 turn.
1
2
3.
Fill engine oil (WP 0009 00 or WP 0010 00).
WARNING
If machine is parked indoors, DO NOT run engine unless exhaust fumes are vented to the outside. Failure to
follow this warning may cause injury or death due to carbon monoxide poisoning.
4.
Start engine and check for leaks (TM 5-3800-205-10-1 or TM 5-3800-205-10-2).
5.
Install center guard plate (WP 0100 00).
END OF WORK PACKAGE
0013 00-2
