TM 5-3800-205-23-1
ENGINE OIL PAN REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Materials/Parts - Continued
Maintenance Level
Gasket
Unit
Personnel Required
Tools and Special Tools
Two
Tool kit, general mechanic's (Item 33, WP 0172
References
Shop equipment, common no. 1 (Item 24, WP
Equipment Condition
Materials/Parts
Engine oil drained (WP 0010 00)
Oil, lubricating (Item 25, 26 or 29, WP 0171 00)
Front and center guard plates removed (WP 0100
Rag, wiping (Item 31, WP 0171 00)
REMOVAL
1.
Remove 36 bolts (1) and washers (2) from engine oil pan (3).
CAUTION
Do NOT pry on engine oil pan. Damage to oil pan and/or engine mounting surfaces could result.
Assistance is required when lowering oil pan due to size of oil pan. Failure to follow this caution may
result in damage to oil pan.
NOTE
4
1,2
3
(HIDDEN)
It may be necessary to tap lightly on oil
pan with a rubber mallet to break seal
between oil pan and engine block.
2.
Lower engine oil pan (3) from engine.
3.
Remove and discard oil pan gasket (4).
390-343
ENGINE NOT SHOWN
