TM 5-3800-205-23-1
ROCKER ARM COVER REPLACEMENT - CONTINUED
0011 00
INSTALLATION
1.
If gasket (4) was removed, clean any remaining gasket material from rocker arm cover (3).
NOTE
Adhesive is NOT required. Gasket is designed to be installed dry.
2.
If removed, position new gasket (4) on intake mani-
FRONT
REAR
fold (5).
3.
Install rocker arm cover (3) on cylinder head (5) with
14 washers (2) and bolts (1). Tighten bolts finger tight.
4.
Tighten bolts (1) to 106 lb-in. (12 Nm) in sequence
illustrated.
390-1029
5.
Close engine access door (TM 5-3800-205-10-1 or TM 5-3800-205-10-2).
END OF WORK PACKAGE
0011 00-2
