TM 5-3800-205-23-1
FUEL SHUTOFF SOLENOID REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Equipment Condition
Maintenance Level
Unit
Machine parked on hard, level surface (TM 5-3800-
205-10-1 or TM 5-3800-205-10-2)
Tools and Special Tools
Tool kit, general mechanic's (Item 33, WP 0172
Scraper bowl or water tank lowered to ground (TM
5-3800-205-10-1 or TM 5-3800-205-10-2)
Shop equipment, common no. 1 (Item 24, WP
Parking brake applied (TM 5-3800-205-10-1 or TM
5-3800-205-10-2)
Wrench, spanner (Item 37, WP 0172 00)
Wheels chocked (TM 5-3800-205-10-1 or TM 5-
Materials/Parts
3800-205-10-2)
Oil, lubricating (Item 24, 25, or 26, WP 0171 00)
Battery disconnect switch in OFF position (TM 5-
Rag, wiping (Item 31, WP 0171 00)
3800-205-10-1 or TM 5-3800-205-10-2)
Tag, marker (Item 39, WP 0171 00)
Engine access door opened (TM 5-3800-205-10-1
or TM 5-3800-205-10-2)
Seal
WARNING
DO NOT perform fuel system checks, inspections or maintenance while smoking or near fire, flames or
sparks. Clean up all leaked or spilled fuel. Fuel may ignite causing damage to machine and injury or
death to personnel.
CAUTION
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life.
NOTE
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance,
testing, adjusting and repair of the machine. Be prepared to collect fluid with suitable containers before
opening any compartment or disassembling any component containing fluids.
Dispose of all fluids according to local regulations and mandates.
Tag all wires to aid in installation.
