TM 5-3800-205-23-1
FUEL GOVERNOR HOSES AND LINES REPLACEMENT - CONTINUED
0020 00
FUEL HOSE REMOVAL
CAUTION
Use line wrenches to disconnect/connect fuel lines, to avoid damage to fittings.
NOTE
Perform following steps to remove each of four fuel hoses.
Fittings include elbows, tees, adapters, and O-rings. Discard O-rings when removed.
1.
Remove hose (2) and fitting (3) from governor (1).
2
1
3
NOTE
Cut tiedown straps and remove screws and hose clamps, as necessary, to separate each hose.
2.
Remove other end of hose (2) and fitting (5) from sec-
4
5
2
ondary fuel filter (4).
0020 00-2
