TM 5-3800-205-23-1
SECONDARY FUEL FILTERS AND BASE REPLACEMENT - CONTINUED
0021 00
INSTALLATION - CONTINUED
5.
At opposite side of fuel filter base (5), connect fuel
6
7
hose (6) to elbow.
6.
Install fuel pressure sensor (7) to adapter at side of
fuel filter base (5).
7.
Connect pressure sensor (7) connector to wiring har-
ness (8) connector and install in clip (9).
5
9
8
8.
Position two drain hoses (2) on two elbows at drain
1
valves (4) of fuel filter base (5) and tighten two hose
clamps (3).
5
9.
Apply a thin coat of fuel to rubber seal of two new fuel
filter elements (1).
10.
Install two fuel filter elements (1) to fuel filter base (5)
until rubber seal contacts surface of fuel filter base.
Tighten each filter element an additional 3/4 turn.
4
3
2
1
0021 00-5
