TM 5-3800-205-23-1
HYDRAULIC OIL COOLER REPLACEMENT - CONTINUED
0026 00
NOTE
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance,
testing, adjusting and repair of the machine. Be prepared to collect fluid with suitable containers before
opening any compartment or disassembling any component containing fluids.
Dispose of all fluids according to local regulations and mandates.
Tag all hoses to aid in installation.
Cap hoses to prevent fluid loss and contamination of the hydraulic system.
REMOVAL
1.
Relieve hydraulic system pressure by moving control
levers through all positions (TM 5-3800-205-10-1 or
4
1,2,3
TM 5-3800-205-10-2).
2.
Remove eight plugs (1) from front of engine grille (4).
3.
With assistance, remove eight bolts (2), washers (3),
and engine grille (4) from front of machine.
4.
Disconnect two hydraulic hoses (6) from two elbows
6
5
(5) of hydraulic oil cooler (7).
7
0026 00-2
