TM 5-3800-205-23-1
HYDRAULIC OIL COOLER REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
References
Maintenance Level
Unit
Equipment Condition
Tools and Special Tools
Machine parked on hard, level surface (TM 5-380-
Tool kit, general mechanic's (Item 33, WP 0172
205-10-1 or TM 5-3800-205-10-2)
Scraper bowl or water tank lowered to ground (TM
Shop equipment, common no. 1 (Item 24, WP
5-3800-205-10-1 or TM 5-3800-205-10-2)
Parking brake applied (TM 5-3800-205-10-1 or TM
Materials/Parts
5-3800-205-10-2)
Wheels chocked (TM 5-3800-205-10-1 or TM 5-
3800-205-10-2)
Battery disconnect switch in OFF position (TM 5-
3800-205-10-1 or TM 5-3800-205-10-2)
O-ring (2)
WARNING
DO NOT disconnect or remove any hydraulic system line or fitting unless engine is shut down and
hydraulic system pressure has been relieved. Tighten all connections before applying pressure. Escap-
ing hydraulic fluid under pressure can penetrate the skin, causing serious injury.
At operating temperature, hydraulic oil is hot. Allow hydraulic oil to cool before disconnecting any
hydraulic lines. Failure to do so could result in injury.
Hydraulic fluid is very slippery. Immediately wipe up any spills. Failure to follow this warning may
result in injury to personnel.