TM 5-3800-205-23-1
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Equipment Condition - Continued
Maintenance Level
Unit
Scraper bowl or water tank lowered to ground (TM
5-3800-205-10-1 or TM 5-3800-205-10-2)
Tools and Special Tools
Tool kit, general mechanic's (Item 33, WP 0172
Parking brake applied (TM 5-3800-205-10-1 or TM
5-3800-205-10-2)
Wheels chocked (TM 5-3800-205-10-1 or TM 5-
Personnel Required
3800-205-10-2)
Two
Battery disconnect switch in OFF position (TM 5-
3800-205-10-1 or TM 5-3800-205-10-2)
Equipment Condition
Machine parked on hard, level surface (TM 5-380-
Engine access door removed, if replacing muffler
205-10-1 or TM 5-3800-205-10-2)
WARNING
Do NOT remove guard, exhaust or muffler until they have cooled to the touch. Wear gloves and protective
clothing as required to protect against burns. Failure to follow this warning may cause personnel injury.
REMOVAL
1.
Remove two screws (1) and washers (2) from top and
3,4
bottom of exhaust guard (8).
2.
Inspect two clamps (5) for cracks or damage. If
clamps are cracked or damaged, remove two nuts (6),
5,6,7
1,2
washers (7), screws (3), washers (4), and clamps.
8
1,2