TM 5-3800-205-23-1
ELECTRICAL GENERAL MAINTENANCE INSTRUCTIONS - CONTINUED
0033 00
STARTER GROUND CABLE REPLACEMENT
1.
Place battery disconnect switch in OFF position (TM 5-3800-205-10-1 or TM 5-3800-205-10-2).
2.
Open engine access door (TM 5-3800-205-10-1 or TM 5-3800-205-10-2).
3.
Remove screw (48), washer (49), and ground cable (50) from ground lug (51).
4.
Remove nut (52), lockwasher (53), and other end of
ground cable (50) from starter terminal (54). Discard
lockwasher.
NOTE
Ensure ground points are clean and free of
paint.
5.
Install ground cable (50) on starter terminal (54) with
new lockwasher (53) and nut (52).
6.
Install other end of ground cable (50) on ground lug
(51) with washer (49) and screw (48).
7.
Close engine access door (TM 5-3800-205-10-1 or
TM 5-3800-205-10-2).
390-1870
48,49
50,52
50,51
53,54
CAB-TO-FRAME GROUND STRAP REPLACEMENT
1.
Place battery disconnect switch in OFF position (TM 5-3800-205-10-1 or TM 5-3800-205-10-2).
NOTE
Cab-to-frame ground strap is located below cab and to the rear of seat on left side.
2.
Remove screw (55), washer (56), and ground strap (58) from cab ground lug (57).
55,56,57
58
59,60,61
390-1304
0033 00-11
