TM 5-3800-205-23-1
BACKUP ALARM SWITCH REPLACEMENT - CONTINUED
0036 00
REMOVAL - CONTINUED
6.
Mark outline of backup alarm switch (15) on bracket (21).
NOTE
Remove tiedown straps as needed and discard. Use new tiedown straps on installation.
7.
Remove two screws (16), washers (17), nuts (18), and backup alarm switch (15) from bracket (21).
8.
Remove 114 red lead (19) from COMMON terminal (20).
9.
Remove 321 brown lead (22) from OPEN terminal (23).
15
21
19,20
16,17,18
22,23
INSTALLATION
1.
Install 321 brown lead (22) on OPEN terminal (23).
2.
Install 114 red lead (19) on COMMON terminal (20).
3.
Install backup alarm switch (15) on bracket (21) with two screws (16), washers (17), and nuts (18).
4.
Install panel (11) with four washers (8) and screws (7).
5.
Install nut (10) on valve (7).
6.
Install emergency brake handle (6) on valve (7) with new spring pin (5).
7.
Install nut (12) on valve (13).
8.
Install parking brake handle (4) on valve (13) with new spring pin (3).
9.
Install neutral lock lever (2) on panel (11) with new spring pin (1).
0036 00-2
