TM 5-3800-205-23-1
BACKUP ALARM SWITCH REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Maintenance Level
Equipment Condition
Machine parked on hard, level surface (TM 5-3800-
Unit
205-10-1 or TM 5-3800-205-10-2)
Tools and Special Tools
Scraper bowl or water tank lowered to ground (TM
5-3800-205-10-1 or TM 5-3800-205-10-2)
Tool kit, general mechanic's (Item 33, WP 0172
Parking brake applied (TM 5-3800-205-10-1 or TM
5-3800-205-10-2)
Materials/Parts
Wheels chocked (TM 5-3800-205-10-1 or TM 5-
3800-205-10-2)
Strap, tiedown (Item 38, WP 0171 00)
Battery disconnect switch in OFF position (TM 5-
3800-205-10-1 or TM 5-3800-205-10-2)
Pin, spring (3)
REMOVAL
1.
Remove spring pin (1) and neutral lock lever (2) from panel (11). Discard spring pin.
2.
Remove spring pin (3), parking brake handle (4), and nut (12) from valve (13). Discard spring pin. Discard nut if seal is
cracked or damaged.
3.
Remove spring pin (5), emergency brake handle (6), and nut (10) from valve (7). Discard spring pin. Discard nut if seal
is cracked or damaged.
4.
Remove four screws (8) and washers (9) from panel (11).
NOTE
Panel does not have to be completely removed to access backup alarm switch.
5.
Slide panel (11) up transmission shift lever (14) and turn panel to left.
3
4
6
5
7
2
8,9
1
10
14
12
11
13
