TM 5-3800-205-23-1
MAIN, FUEL PUMP, START, AND AIR INTAKE HEATER RELAYS REPLACEMENT - CONTINUED
0045 00
FUEL PUMP RELAY REMOVAL
1.
Remove nine screws (1) from panel (2).
2.
Remove panel (2).
3.
Slide grommet (3) and cable (4) from panel (2).
4.
Remove two screws (11) and washers (12) from relay bracket (13).
NOTE
Tag wires to aid in installation.
5.
Disconnect black lead (14) from orange and black lead (15).
6.
Remove two nuts (16) and wires (17) from terminals (18) and remove fuel pump relay.
FUEL PUMP
13
11,12
RELAY
14
15
16,17,18
FUEL PUMP RELAY INSTALLATION
1.
Install wires (17) on terminals (18) with two nuts (16).
2.
Secure relay bracket (13) with two screws (11) and washers (12).
3.
Connect black lead (14) to orange and black lead (15).
4.
Slide grommet (3) and cable (4) on panel (2).
5.
Secure panel (2) with nine screws (1).
0045 00-3