TM 5-3800-205-24-1
WORK LIGHT MAINTENANCE - CONTINUED
0057 00
LAMP REMOVAL - CONTINUED
3.
Disconnect white lamp wire (7) from white work light wiring harness wire (8).
4.
Pinch together and release two retaining wires (6) and remove lamp (5) from lens assembly (2).
5
6
7
2
8
390-1851
LAMP INSTALLATION
CAUTION
3
4
2
Avoid touching glass surface of lamp with
1
fingers. Oil from fingers on lamp will
shorten life of lamp.
1.
Position lamp (5) on lens assembly (2) and secure with
two retaining wires (6).
2.
Connect white lamp wire (7) to white work light wir-
ing harness wire (8).
NOTE
Inspect rubber bezel prior to installation to
ensure it is not damaged. Replace if dam-
aged.
3.
Position rubber bezel (1) with lens assembly (2) on
work light (4). Ensure that rubber bezel is fully seated.
4.
Install two clamps (3) on rubber bezel (1).
390-1850
0057 00-2
