TM 5-3800-205-24-1
WORK LIGHT MAINTENANCE - CONTINUED
0057 00
WORK LIGHT REMOVAL
1.
Disconnect tractor wiring harness connector (9) from
4
9
rear of work light housing (4).
2.
Remove bolt (14), washer (15), and work light (16)
from work light bracket (13).
10
16
11
12
13
390-1850
14,15
NOTE
Two hydraulic hoses and rubber bushing will also be removed as clamp halves are removed.
3.
Remove two bolts (11), washers (12), two clamp halves (10), and work light bracket (13) from tractor.
WORK LIGHT INSTALLATION
NOTE
Two hydraulic hoses and rubber bushing will also be installed as clamp halves are installed.
1.
Install work light bracket (13) and two clamp halves (10) on tractor with two washers (12) and bolts (11).
2.
Install work light (16) on work light bracket (13) with washer (15) and bolt (14).
3.
Connect tractor wiring harness connector (9) to rear of work light housing (4).
END OF WORK PACKAGE
0057 00-3
