TM 5-3800-205-23-1
TRANSMISSION OIL COOLER REPLACEMENT - CONTINUED
0074 00
REMOVAL
1.
Disconnect two hydraulic hose assemblies (1) from transmission oil cooler (5). Remove and discard O-rings from
hydraulic hose assemblies.
2.
Remove six nuts (2), 12 washers (3), six bolts (4) and transmission oil cooler (5) from radiator.
3.
Remove elbows from transmission oil cooler (5).
2,3,4
1
5
390-1422
1
INSTALLATION
1.
Install elbows on transmission oil cooler (5).
2.
Install transmission oil cooler (5) on radiator with six bolts (4), 12 washers (3), and six nuts (2).
3.
Coat with oil and install new O-rings in two hydraulic hose assemblies (1).
4.
Connect two hydraulic hose assemblies (1) to elbows on transmission oil cooler (5).
5.
Install hydraulic oil cooler (WP 0026 00).
6.
Check transmission oil level and add as needed (WP 0009 00 and WP 0010 00).
WARNING
If machine is parked indoors, DO NOT run engine unless exhaust fumes are vented to the outside. Failure to
follow this warning may cause injury or death due to carbon monoxide poisoning.
7.
Operate transmission (TM 5-3800-205-10-1 or TM 5-3800-205-10-2) and check for leaks.
8.
Install engine grille (WP 0099 00).
END OF WORK PACKAGE
0074 00-2
