TM 5-3800-205-23-1
TRANSMISSION OIL COOLER REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Personnel Required
Maintenance Level
Unit
Two
Tools and Special Tools
References
Tool kit, general mechanic's (Item 33, WP 0172
TM 5-3800-205-10-1
Shop equipment, common no. 1 (Item 24, WP
TM 5-3800-205-10-2
Materials/Parts
Cap set, protective (Item 5, WP 0171 00)
Oil, lubricating (Item 24, 27, 28 or 29, WP 0171
Equipment Condition
Rag, wiping (Item 31, WP 0171 00)
Engine grille removed (WP 0099 00)
Tag, marker (Item 39, WP 0171 00)
Seal, O-ring (2)
Hydraulic oil cooler removed (WP 0026 00)
WARNING
At operating temperature, transmission oil is hot. Allow oil to cool before disconnecting any transmis-
sion lines. Failure to do so could result in injury.
Transmission oil is very slippery. Immediately wipe up any spills. Failure to follow this warning may
result in injury to personnel.
CAUTION
Cap hoses to prevent fluid loss and contamination of system.
NOTE
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance,
testing, adjusting and repair of the machine. Be prepared to collect fluid with suitable containers before
opening any compartment or disassembling any component containing fluids.
Dispose of all fluids according to local regulations and mandates.
Tag all hoses to aid in installation.
