TM 5-3800-205-23-1
FRONT WHEEL, HUB, BRAKE DISC, AND WHEEL BEARINGS AND SEALS
MAINTENANCE - CONTINUED
0080 00
CLEANING AND INSPECTION
WARNING
Solvent cleaning compound MIL-PRF-680 Type III is an environmentally compliant and low toxic
material. However, it may be irritating to the eyes and skin. Use protective gloves and goggles. Use in well-
ventilated areas. Keep away from open flames and other sources of ignition. Failure to do so may result in
injury or death to personnel.
1.
Clean all removed components with cleaning compound and dry thoroughly.
2.
Inspect for cracks, breaks, chips, excessive scoring or other damage. Replace any damaged component.
3.
Inspect bushing inside hub for damage. If damaged, remove and replace bushing.
4.
Inspect bearing cups in wheel for damage. Remove and replace bearing cups if damaged.
ASSEMBLY
1.
Install brake disc to wheel (4) with 24 washers and
11
4
bolts.
2.
Using cone installer, install new duo-cone seal (11)
to wheel (4).
0080 00-4
