TM 5-3800-205-23-1
PARKING BRAKE ASSEMBLY MAINTENANCE - CONTINUED
0082 00
REMOVAL - CONTINUED
4.
Remove four bolts (10) and parking brake assembly
4
10
(4) from transfer case.
CLEANING AND INSPECTION
1.
Clean all components of parking brake group.
NOTE
If linings are worn down to rivet heads, brakeshoes are not serviceable.
2.
Inspect and replace any item found to be worn or damaged.
INSTALLATION
1.
Install parking brake assembly (4) on transfer case with four bolts (10).
2.
Install flange (2) on parking brake assembly (4) with washer (6) and bolt (5).
3.
Install brakedrum (3) on flange (2) with eight washers and bolts (1).
4.
Install yoke rod end (9) with clevis pin (8) and new cotter pin (7).
2
4
1
2
3
5
9
8
6
7
0082 00-2
