TM 5-3800-205-23-1
AIR COMPRESSOR GOVERNOR AND AIR COMPRESSOR MAINTENANCE - CONTINUED
0083 00
AIR COMPRESSOR GOVERNOR REMOVAL
1.
Remove vent valve (4) from air compressor governor (7).
2.
Loosen collar (12) of adapter (13) and disconnect hose (1) from adapter.
3.
Disconnect hose (2) from adapter (3).
4.
Remove two long bolts (5), washers (6), and governor (7) from plate (11).
5.
Remove two adapters (3 and 13) from governor (7).
6.
If damaged, remove two bolts (9), washers (10), and plate (11) from fan drive (8).
1
2,3
12,13
11
4
9,10
5,6
8
7
AIR COMPRESSOR GOVERNOR INSTALLATION
1.
If removed, install plate (11) to fan drive (8) with two washers (10) and bolts (9).
2.
Apply a thin coat of pipe sealing compound to pipe threads of two adapters (3 and 13) and install adapters to governor
(7).
3.
Install governor (7) to plate (11) with two washers (6) and long bolts (5).
4.
Connect hose (2) to adapter (3).
5.
Connect hose (1) to adapter (13) and tighten collar (12).
6.
Apply a thin coat of pipe sealing compound to pipe threads of vent valve (4) and install vent valve to governor (7).
0083 00-2
