TM 5-3800-205-23-1
SERVICE BRAKE BLEEDING - CONTINUED
0095 00
BLEEDING - CONTINUED
NOTE
Wheel brake calipers have two bleed screws per caliper. When bleeding caliper do one bleed screw at a time.
5.
Install clear hose on bleed screw (5). Open one bleed
5
screw on caliper (4) to allow fluid flow. Close bleed
4
screw when bubble-free fluid flow is observed.
Remove hose from bleed screw.
3
6.
Repeat step 5 for other bleed screw (5) on caliper (4).
5
390-1757
7.
Disconnect power bleed unit.
8.
Ensure brake fluid reservoir is full before installing cover (WP 0010 00).
9.
Install rear guard plate (WP 0100 00).
END OF WORK PACKAGE
0095 00-3
