TM 5-3800-205-23-1
ROPS/FOPS REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Equipment Condition
Maintenance Level
Unit
Machine parked on hard, level surface (TM 5-3800-
205-10-1 or TM 5-3800-205-10-2)
Tools and Special Tools
Scraper bowl or water tank lowered to ground (TM
Tool kit, general mechanic's (Item 33, WP 0172
5-3800-205-10-1 or TM 5-3800-205-10-2)
Parking brake applied (TM 5-3800-205-10-1 or TM
Shop equipment, common no. 1 (Item 24, WP
5-3800-205-10-2)
Wheels chocked (TM 5-3800-205-10-1 or TM 5-
Sling, nylon (Item 27, WP 0172 00)
3800-205-10-2)
Personnel Required
Battery disconnect switch in OFF position (TM 5-
3800-205-10-1 or TM 5-3800-205-10-2)
Three
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in injury or death to
personnel.
NOTE
ROPS/FOPS weighs 447 lb (203 kg).
