TM 5-3800-205-23-1
HYDRAULIC TANK FILLER CAP REPAIR - CONTINUED
0120 00
DISASSEMBLY - CONTINUED
1.
Remove retaining ring (6) and filler cap (1) from cover (5). Discard retaining ring.
6
1
5
8
7
390-1793
CLEANING AND INSPECTION
1.
Clean all components with clean, dry rags.
2.
Inspect components for cracks, wear and damage. Replace any cracked, worn or damaged components.
3.
Check that pressure relief hole in filler cap is clear of any debris. Clean hole as required. If hole is plugged and cannot be
cleaned, replace filler cap.
4.
Inspect cover lever (7). Ensure that lever operates freely and is not bent or damaged. If lever is bent or damaged, remove
pin (8) and lever. Install replacement lever with pin.
ASSEMBLY
1.
Install filler cap (1) on cover (5) with new retaining ring (6).
2.
Install ball (2), pressure plate (3), and new gasket (4) on filler cap (1).
3.
Install hydraulic tank filler cap (TM 5-3800-205-10-1 or TM 5-3800-205-10-2).h
2
3
1
4
390-1792
END OF WORK PACKAGE
0120 00-2