TM 5-3800-205-23-1
TRANSMISSION HYDRAULIC CONTROL VALVE REPLACEMENT - CONTINUED
0148 00
REMOVAL - CONTINUED
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable lift capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
NOTE
Control valve weighs 70 lb (32 kg).
4.
Attach a nylon sling to links and attach sling to a suitable lifting device. Take up slack in sling.
5.
Remove control valve (3) from transmission case (4).
6.
Remove lifting device, sling, and links from control valve (3).
7.
Remove sleeves (7) from transmission case (4). Remove two O-rings (8) from each sleeve. Discard O-rings.
5,6
7,8
1,2
3
4
4
1,2
0148 00-2
