TM 5-3800-205-23-1
TRANSMISSION HYDRAULIC CONTROL VALVE REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Materials/Parts
Maintenance Level
Direct Support
Oil, lubricating (Item 24, 27, 28 or 29, WP 0171
Tools and Special Tools
Rag, wiping (Item 31, WP 0171 00)
Tool kit, general mechanic's (Item 33, WP 0172
O-ring (4)
Shop equipment, field maintenance (Item 23, WP
Equipment Condition
Bracket, link (Item 6, WP 0172 00)
Transmission shift control cam and linkage
Sling, nylon (Item 27, WP 0172 00)
removed (WP 0088 00)
CAUTION
Use caution to ensure dirt or debris does not fall into transmission case and cause contamination. Cover
exposed openings with a clean rag. Contamination of transmission could result in premature failure.
REMOVAL
1.
Remove bolt (5) and washer (6) from control valve (3). Move two sleeves (7) away from control valve.
2.
Remove four bolts (1) and washers (2) from control valve (3).
3.
Install two links in two bolt holes in control valve (3), to provide a balanced lift
5,6
7,8
1,2
3
4
4
1,2
