TM 5-3800-205-23-1
DRAFT FRAME, HITCH, AND TRACTOR FRAME PINS AND
BEARINGS REPLACEMENT - CONTINUED
0155 00
DRAFT FRAME REMOVAL
1.
At right-front of draft frame (3), disconnect three connectors (2) of tractor wiring harness (4) from two wiring harnesses
(1).
2.
Remove six screws (5), seven washers (6), nut, and six hose clamps (7) to separate tractor wiring harness (4) from draft
frame (3). Coil wiring harness and set aside on tractor.
3
2
5,6
4
1
7
3.
At right side of draft frame (3), directly above transmission, tag and disconnect two air hoses (10) from adapters (8).
Remove and discard two O-rings (9). Set hoses aside next to hitch.
10
3
8,9
0155 00-3
