TM 5-3800-205-23-1
DRAFT FRAME, HITCH, AND TRACTOR FRAME PINS AND
BEARINGS REPLACEMENT - CONTINUED
0155 00
DRAFT FRAME REMOVAL - CONTINUED
NOTE
Perform following step at two places at top of hitch to disconnect steering linkage from hitch.
It may be necessary to break or grind off welds to allow removal of bolts.
Shafts can be removed upward from hitch.
7.
Remove grease fitting (23), three bolts (21), washers (22), retainer plate (20), and shaft (24) from hitch (25).
21,22
23
25
24
20
8.
Position forklift truck facing machine at front-center of bumper.
9.
Raise forks to contact bumper.
CAUTION
Position of chains must secure bumper to forks in a vertical as well as horizontal position. Failure to do
so may result in damage to equipment.
10.
Attach tiedown chains to secure bumper to forks.
0155 00-6
