TM 5-3800-205-23-1
DRAFT FRAME, HITCH, AND TRACTOR FRAME PINS AND
BEARINGS REPLACEMENT - CONTINUED
0155 00
DRAFT FRAME INSTALLATION
WARNING
All personnel must stand clear of machine and forklift truck. Failure to follow this warning could result in
serious injury or death.
NOTE
Ensure that two links of steering linkage are positioned to tractor hitch as hitch is installed to draft frame.
1.
Using forklift truck, drive forward to join hitch to draft frame.
NOTE
Perform following steps to install lower hitch pin to secure tractor hitch to draft frame.
2.
Using soft-faced hammer, install shims (31) and lower hitch pin (30).
3.
Install washer (33) and nut (32). Tighten nut to 724-900 lb-ft (980-1220 Nm).
30
32,33
31
NOTE
Perform following steps to install upper hitch pin to secure tractor hitch to draft frame.
4.
Using soft-faced hammer, install upper hitch pin (29).
5.
Install retainer plate (28) to pin (29) with three washers (27) and bolts (26).
6.
Remove tiedown chains from bumper and forklift truck.
7.
Lower forks and remove forklift truck.
0155 00-10
