TM 5-3800-205-23-1
DRAFT FRAME, HITCH, AND TRACTOR FRAME PINS AND
BEARINGS REPLACEMENT - CONTINUED
0155 00
DRAFT FRAME INSTALLATION - CONTINUED
12.
At right side of draft frame (3), install two O-rings (9) and connect two air hoses (10) to two adapters (8).
10
8,9
3
13.
Install tractor wiring harness (4) to draft frame (3) with six hose clamps (7), nut, seven washers (6), and six screws (5).
14.
Connect three connectors (2) of tractor wiring harness (4) to two wiring harnesses (1).
3
2
5,6
4
1
7
15.
Remove hitch lock block assemblies (Refer to External Air Transport by CH-47 Helicopter, TM 5-3800-205-10-1 or
TM 5-3800-205-10-2).
16.
Remove supports from under draft frame.
17.
Lubricate hitch and steering linkage grease fittings with GAA grease (TM 5-3800-205-10-1 or TM 5-3800-205-10-2).
18.
Reconnect parking brake (TM 5-3800-205-10-1 or TM 5-3800-205-10-2).
0155 00-14
