TM 5-3800-205-23-1
CONTAINER REPAIR - CONTINUED
0164 00
MATERIALS REQUIRED - CONTINUED
Table 1. Materials List - Continued.
PART NUMBER (CAGE
NOMENCLATURE
CODE)NATIONAL STOCK
DESCRIPTION
NUMBER
Dowclene EC
PPSPN (6K748)
Container face skin repair
Dry Cleaning Solvent
P-D-680B (4N760)
Cleaning of mechanical parts
Emery Paper
Commercially Available
Container face skin repair
Epoxy Primer
MI-P-23377
Painting of container
Epoxy Resin
EA828 (54527)
Container face skin repair
Isopropyl Alcohol
O-E-760 (51883)
Cleaning of electrical parts
Low-lint Cleaning Cloth
MIL-C-85043 (58536)
Cleaning of electrical and mechanical parts
Methyl Ethyl Keytone (MEK)
ASTM-D-740 (81346)
Container face skin repair
Non-Metallic Brush
H-B-695
Cleaning of adhesives from mechanical parts
Paint Brush
Commercially Available
Cleaning of electrical parts and adhesives from
mechanical parts
Rivets
Commercially Available
Container face skin repair
Seal Adhesive
PN 93002-033
Installation of door seal
Sealant, SR150
PN 93077-005
Installation of hinge strap and bolts
Staples
Commercially Available
Installation of door seal
Toluene
Commercially Available
Cleaning of adhesives and anti-seize tape from
mechanical parts
REPAIR OF FACE SKIN DAMAGE (ALUMINUM-BONDED MATERIAL)
Repair of Dents or Depressions.
1.
NOTE
The container top, floor, and side panels are constructed of aluminum-bonded material. The following pro-
cedures must be used to repair dents or depressions. If the face sheet is not punctured proceed as follows:
a.
Sand damaged area with emery paper to remove all traces of paint.
0164 00-2