TM 5-3800-205-23-1
CONTAINER REPAIR - CONTINUED
0164 00
REPAIR OF FACE SKIN DAMAGE (ALUMINUM-BONDED MATERIAL) - CONTINUED
(2)
Cut or file corners to 0.25 in. (6.35 mm) radius.
b.
Position patch centered over damaged area and lightly scribe or mark outline of patch onto panel face.
c.
Remove paint from panel face within marked outline. All traces of paint must be removed and sanded.
d.
Lay out rivet hole pattern around edge of patch as shown.
(1)
Use 3/8 in. (9.53 mm) edge distance and 1 in. (25.40 mm) spacing.
(2)
Drill holes using no. 30 (0.1285 in.) drill.
390-1910
0164 00-4
