TM 5-3800-205-23-2
ELEVATOR CHAIN IDLER REPAIR - CONTINUED
0034 00
DISASSEMBLY - CONTINUED
9.
Using driver and press, remove bearing race (14) from
3
14
roller (3). Repeat step for other bearing race.
390-792
CLEANING AND INSPECTION
Clean all parts and inspect for wear and damage. Replace worn or damaged parts.
ASSEMBLY
1.
Using driver and press, install bearing race (14) in roller (3) until bearing race is seated in roller. Repeat step for other
bearing race.
2.
Apply GAA grease to roller bearing (13) and install roller bearing in roller (3).
3.
Using driver, install new lip seal (12) in roller (3).
4.
Install spacer (11) on roller (3).
5.
Apply GAA grease to roller bearing (10) and install roller bearing on roller (3).
6.
Install washer (9) on roller (3).
7.
Install bolt (8) on roller (3).
8.
Install cap (7) on roller (3) with four bolts (6).
7
6
3
390-786
0034 00-3
