TM 5-3800-205-23-2
ELEVATOR CHAIN ROLLER MAINTENANCE - CONTINUED
0035 00
INSTALLATION
NOTE
Lip seal must be installed with spring of lip seal toward roller.
1.
Using a driver and hammer, install new lip seal (11) on elevator (4).
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable lift capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
NOTE
Shaft weighs 85 lb (39 kg).
2.
With assistance, install shaft (6) on elevator (4).
4
390-800
390-799
4
11
6
0035 00-4