TM 5-3800-205-23-2
ELEVATOR DRIVE REPLACEMENT - CONTINUED
0036 00
REMOVAL - CONTINUED
1.
Remove two bolts (2) and bracket (4) from elevator (3)
2.
Remove bolt (5) and washer (6) from elevator drive (1).
3.
Using a hammer and brass rod, remove pin (7) from elevator drive (1).
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable lift capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
NOTE
Elevator drive weighs 750 lb (340 kg).
4.
Carefully remove elevator drive (1) from elevator (3).
3
2
3
390-807
390-808
4
5,6,7
1
0036 00-2
