TM 5-3800-205-23-2
EJECTOR CARRIER ROLLER MAINTENANCE - CONTINUED
0037 00
ADJUSTMENT
NOTE
Ejector carrier rollers are correctly adjusted if ejector does not contact bottom of scraper bowl.
1.
Loosen bolt (7).
1
2.
Move roller shaft (4) to a position that allow ejector to
pass over bottom of scraper bowl.
3.
Tighten bolt (7).
4.
Repeat steps 1 through 3 for other ejector roller.
5.
Start engine (TM 5-3800-205-10-1).
6.
Move ejector (1) forward and backward (TM 5-3800-
205-10-1). Check for drag between ejector (1) and
bottom of scraper bowl.
7.
Stop engine (TM 5-3800-205-10-1).
390-1732
4
7
8.
Repeat procedure if additional adjustment is neces-
sary.
END OF WORK PACKAGE
0037 00-4
