TM 5-3800-205-23-2
EJECTOR SUPPORT ROLLER MAINTENANCE
THIS WORK PACKAGE COVERS
Removal, Disassembly, Cleaning and Inspection, Assembly, Installation, Adjustment
INITIAL SETUP
Maintenance Level
Materials/Parts
Grease, GAA (Item 16, WP 0047 00)
Direct Support
Personnel Required
Tools and Special Tools
Two
Tool kit, general mechanic's (Item 33, WP 0048 00)
References
Shop equipment, field automotive (Item 23, WP
Equipment Condition
Bearing, sleeve (Item 2, WP 0048 00)
Machine parked on hard, level surface (TM 5-3800-
Driver set (Item 7, WP 0048 00)
205-10-1)
Guide, seal (Item 13, WP 0048 00)
Scraper bowl lowered to ground (TM 5-3800-205-
10-1)
Puller attachment, mechanical (Item 20, WP 0048
Parking brake applied (TM 5-3800-205-10-1)
Wheels chocked (TM 5-3800-205-10-1)
Sling, nylon (Item 27, WP 0048 00)
REMOVAL
1.
Start engine and position ejector (3) to front of scraper bowl. Stop engine (TM 5-3800-205-10-1).
2.
Attach a nylon strap and suitable lifting device to ejector (3).
3.
Remove three bolts (1) and plate (2) from ejector (3).
4.
Place block (5) under ejector cylinder (4).
4
2
1
3
390-916
390-917
5
