TM 5-3800-205-23-2
EJECTOR SUPPORT ROLLER MAINTENANCE - CONTINUED
0039 00
INSTALLATION
1.
Using soft-faced hammer, install ejector support roller (7) on ejector (3).
2.
Install nut (9) on ejector support roller (7). Torque nut to 450 lb-ft (610 Nm).
3.
Remove block (8) from ejector (3).
7
9
390-921
390-920
3
8
3
4.
Using a suitable lifting device, move ejector (3) to rear of scraper bowl. Position ejector support roller (7) on track
assembly.
5.
Using a hammer and brass rod, install pin (6) to ejector (3).
7
3
6
390-918
390-919
3
0039 00-4