TM 5-3800-205-23-2
EJECTOR SUPPORT ROLLER MAINTENANCE - CONTINUED
0039 00
DISASSEMBLY
1.
Remove key (10) from ejector support roller (7).
2.
Remove retaining ring (11) from ejector support roller (7).
11
7
7
10
390-924
390-923
3.
Using a driver and hydraulic press, remove plug (12) and roller shaft (13) from ejector support roller (7).
4.
Remove roller bearing (14) from roller shaft (13).
14
13
12 (HIDDEN)
390-926
390-925
7
13
CLEANING AND INSPECTION
Clean and inspect all parts. Replace worn or damaged parts.
ASSEMBLY
1.
Apply GAA grease to roller bearing (14) and install roller bearing on roller shaft (13).
2.
Using a driver, seal guide, sleeve bearing, and hydraulic press, install plug (12) and roller shaft (13) on ejector support
roller (7) until roller shaft is seated in roller.
3.
Install retaining ring (11) on ejector support roller (7).
4.
Install key (10) on ejector support roller (7).
0039 00-3
