TM 5-3800-205-23-2
SLIDING FLOOR REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Materials/Parts
Maintenance Level
Shim (as required)
Direct Support
Personnel Required
Tools and Special Tools
Two
Tool kit, general mechanic's (Item 33, WP 0048 00)
Equipment Condition
Shop equipment, field automotive (Item 23, WP
Sliding floor link removed (WP 0042 00)
REMOVAL
1.
Lower scraper bowl on block and position suitable lifting device under sliding floor (3).
2.
Remove four bolts (2) and two rollers (1) from sliding floor (3). Repeat for other side of scraper.
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable lift capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
NOTE
Sliding floor weighs 860 lb (390 kg).
3.
Carefully lower sliding floor (3) and remove from machine.
1
390-817
390-818
3
3
2
