TM 5-3800-205-23-2
SLIDING FLOOR REPLACEMENT - CONTINUED
0040 00
INSTALLATION
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable lift capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
NOTE
Sliding floor weighs 860 lb (390 kg).
1.
Using suitable lifting device, carefully raise sliding floor (3) and position on machine.
2.
Install two rollers (1) on sliding floor (3) with four
bolts (2). Repeat step for other side of scraper.
1
3.
Measure clearance between roller assemblies and
bowl. Clearance should be 0.06-0.18 in. (1.5-4.6 mm).
4.
If clearance is not as specified, adjust by adding or
390-817
removing shims.
3
2
5.
Install sliding floor link (WP 0042 00).
SHIM
LINK
ARM
FLOOR
LINK
390-1515a
END OF WORK PACKAGE
0040 00-2
