TM 5-3800-205-23-2
SLIDING FLOOR ROLLER REPLACEMENT - CONTINUED
0041 00
DISASSEMBLY - CONTINUED
6.
Remove and discard retaining ring (13) from roller assembly (2).
7.
Using a slide hammer, remove shaft (14) and roller bearing (15) from roller assembly (2).
13
14
390-825
390-824
15
2
2
CLEANING AND INSPECTION
Clean and inspect all parts. Replace worn or damaged parts.
ASSEMBLY
1.
Using a driver and hydraulic press, install shaft (14)
and roller bearing (15) on roller assembly (2).
14
15
390-1816
2
2.
Install new retaining ring (13) on roller assembly (2).
0041 00-3
