TM 5-3800-205-23-2
SLIDING FLOOR DUMP ARM REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Equipment Condition
Maintenance Level
Machine parked on hard, level surface (TM 5-3800-
Direct Support
205-10-1)
Scraper bowl lowered to ground (TM 5-3800-205-
Tools and Special Tools
10-1)
Tool kit, general mechanic's (Item 33, WP 0048 00)
Parking brake applied (TM 5-3800-205-10-1)
Shop equipment, field automotive (Item 23, WP
Wheels chocked (TM 5-3800-205-10-1)
Battery disconnect switch in OFF position (TM 5-
3800-205-10-1)
Sling, nylon (Item 27, WP 0048 00)
REMOVAL
1.
Position floor jack under link assembly (3) and remove two bolts (1), bar (2) and pin assembly (4) from dump arm
assembly. Lower link assembly to ground.
2.
Place wooden block under floor cylinder (9) for support and remove two bolts (7), bar (8) and pin (6) from dump arm
assembly (5).
5
6
7
3
1
2
8
390-831
390-829
4
9
5
