TM 5-3800-205-23-2
SLIDING FLOOR DUMP ARM REPLACEMENT - CONTINUED
0043 00
REMOVAL - CONTINUED
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device is in good condition and of suitable lift capacity. Keep clear of heavy
parts supported only by lifting device. Failure to follow this warning may result in death or injury to person-
nel.
NOTE
Dump arm assembly weighs 60 lb (27 kg).
3.
Attach a nylon sling and suitable lifting device to dump arm assembly (5) and remove two bolts (12), bar (11), and pin
(10). Remove dump arm assembly from machine.
11
12
10
3
12
390-832
390-829
4
5
INSTALLATION
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device is in good condition and of suitable lift capacity. Keep clear of heavy
parts supported only by lifting device. Failure to follow this warning may result in death or injury to person-
nel.
NOTE
Dump arm assembly weighs 60 lb (27 kg).
1.
Install dump arm assembly (5) on machine with pin (10), bar (11), and two bolts (12). Remove nylon sling and lifting
device from dump arm assembly.
2.
Install pin (6), bar (8), and two bolts (7) on dump arm assembly (5). Remove wooden block from floor cylinder (9).
3.
Position link assembly (3) on dump arm assembly (5) and install pin assembly (4), bar (2), and two bolts (1).
END OF WORK PACKAGE
0043 00-2
